S4123 Runner adjuster unit without hole
Our runner adjuster unit with hole allows a quick shut-off in case of defected cavity in a big multi cavity mold.
The production can be continued, till the operator takes time to repair the defected cavity.
With undercut for the ejection process of the cold runner sprue.
S4123/OH hole without undercut.
The mounting of this unit goes into the moving mold half.
The production can be continued, till the operator takes time to repair the defected cavity.
With undercut for the ejection process of the cold runner sprue.
S4123/OH hole without undercut.
The mounting of this unit goes into the moving mold half.
a1 | a2 | b1 | d1 | f | h1 | h2 | h3 | SW | |
---|---|---|---|---|---|---|---|---|---|
S4123/12x17 | 22,5 | 8,7 | 17 | 12 | 3,2 | 17 | 8,5 | 5 | 4 |
S4123/12x22 | 22,5 | 8,7 | 17 | 12 | 3,2 | 22 | 8,5 | 5 | 4 |
S4123/12x27 | 22,5 | 8,7 | 17 | 12 | 3,2 | 27 | 8,5 | 5 | 4 |
S4123/12x36 | 22,5 | 8,7 | 17 | 12 | 3,2 | 36 | 8,5 | 5 | 4 |
S4123/12x46 | 22,5 | 8,7 | 17 | 12 | 3,2 | 46 | 8,5 | 5 | 4 |
S4123/12x56 | 22,5 | 8,7 | 17 | 12 | 3,2 | 56 | 8,5 | 5 | 4 |
S4123/12x66 | 22,5 | 8,7 | 17 | 12 | 3,2 | 66 | 8,5 | 5 | 4 |
S4123/16x22 | 30 | 11 | 22 | 16 | 4,2 | 22 | 14 | 7 | 5 |
S4123/16x27 | 30 | 11 | 22 | 16 | 4,2 | 27 | 14 | 7 | 5 |
S4123/16x36 | 30 | 11 | 22 | 16 | 4,2 | 36 | 14 | 7 | 5 |
S4123/16x46 | 30 | 11 | 22 | 16 | 4,2 | 46 | 14 | 7 | 5 |
S4123/16x56 | 30 | 11 | 22 | 16 | 4,2 | 56 | 14 | 7 | 5 |
S4123/16x66 | 30 | 11 | 22 | 16 | 4,2 | 66 | 14 | 7 | 5 |