S6530 Ejector unit for dynamic mould venting
S6530/ . . .
Mat. Valve: 1.4028 / 50+2 HRC
Mat. Ejector: 1.2344 / 950 HV
Special features:
- Large venting capacity.
- No obstruction of gas outflow by retention of plastic particles.
- Drastic counterpressure reduction in mould cavity.
- Improvement of aesthetic part characteristics.
- Replacement with standardised ejector pins possible.
- User carries out length adjustment.
- Customer-specific sizes also available.
Download PDF
Download Info
A | C | F | L | M | N | P | |
---|---|---|---|---|---|---|---|
S6530/10x300x0,5 | 10 | 0,5 | 16 | 300 | 1,2 | 0,3 | - |
|
|||||||
S6530/10x300x0,7C | 10 | 0,7 | 16 | 300 | 1,2 | 0,5 | 0,5 |
|
|||||||
S6530/10x300x0,8 | 10 | 0,8 * | 16 | 300 | - | - | - |
|
|||||||
S6530/10x400x0,5 | 10 | 0,5 | 16 | 400 | 1,2 | 0,3 | - |
|
|||||||
S6530/10x400x0,7C | 10 | 0,7 | 16 | 400 | 1,2 | 0,5 | 0,5 |
|
|||||||
S6530/10x400x0,8 | 10 | 0,8 * | 16 | 400 | - | - | - |
|
|||||||
S6530/6x300x0,5 | 6 | 0,5 | 12 | 300 | 1,2 | 0,3 | - |
|
|||||||
S6530/6x300x0,7C | 6 | 0,7 | 12 | 300 | 1,2 | 0,5 | 0,5 |
|
|||||||
S6530/6x300x0,8 | 6 | 0,8 * | 12 | 300 | - | - | - |
|
|||||||
S6530/6x400x0,5 | 6 | 0,5 | 12 | 400 | 1,2 | 0,3 | - |
|
|||||||
S6530/6x400x0,7C | 6 | 0,7 | 12 | 400 | 1,2 | 0,5 | 0,5 |
|
|||||||
S6530/6x400x0,8 | 6 | 0,8 * | 12 | 400 | - | - | - |
|
|||||||
S6530/8x300x0,5 | 8 | 0,5 | 14 | 300 | 1,2 | 0,3 | - |
|
|||||||
S6530/8x300x0,7C | 8 | 0,7 | 14 | 300 | 1,2 | 0,5 | 0,5 |
|
|||||||
S6530/8x300x0,8 | 8 | 0,8 * | 14 | 300 | - | - | - |
|
|||||||
S6530/8x400x0,5 | 8 | 0,5 | 14 | 400 | 1,2 | 0,3 | - |
|
|||||||
S6530/8x400x0,7C | 8 | 0,7 | 14 | 400 | 1,2 | 0,5 | 0,5 |
|
|||||||
S6530/8x400x0,8 | 8 | 0,8 * | 14 | 400 | - | - | - |
|